HARD BRICK / DEAD Redmi
Note 4G LTE thats caused by:
HARD BRICK Redmi Note is like:
- Can't Charging / LED charging Off
- Can't detect to Windows
- Can't enter recovery mode and fastboot mode
NOTE: USE THIS GUIDE ONLY FOR DEAD/
HARDBRICK REDMI NOTE 4G ONLY
I want to give tutorial to repair HARD BRICK / DEAD Redmi
Note 4G LTE thats caused by:
- Flashing ROM NOT For Redmi Note 4G / wrong Device ROM
- File ROM damage / damage file in ROM or damage file from
extract that want to Flash
- Flash not perfect / dead electricity, disconnected on the
middle of fasboot flashing,USB Cable damage / Slot USB
Damage
- Flashing wrong Recovery image or fastboot rom
****USE MI PC SUITE TO
FLASH FASTBOOT ROM ON
BRICKED REDMI NOTE LTE *****
Flash MIUI On Bootloop / Bricked Xiaomi Redmi Note 4G Via
Fastboot Mode And Flashtool.
1. We must using PC or computer with windows operating
system based. As suggesstion use windows 7 or higher.
2. Make sure that your Xiaomi Redmi Note 4G device is fully
charged, Or you can provide minimum 80% of battery life.
3. This guide will help you update your device to the latest
MIUI ROM version.
4. All user data, account, and file stored on this process will
be deleted..
5. For best suggesstion, Please back up your data stored on
phone memory.
6. Download and install MIUI ROM Flashing Tool, Here .
7. Download MIUI ROM version for Xiaomi Redmi Note 4G
8. After download complete, Please check if the ROM file
extension is tgz . If it is .gz , please rename it to tgz
9. Turn off the Xiaomi Redmi Note 4G device.
10. Press the Volume– key and the Power button at the same
time to enter Fastboot mode. And you will see like this
picture.
11. Then connect the device to the Windows PC via a micro
USB cable
12. Double click on the downloaded ROM file to decompress
it.
13. Then Open the file folder for the decompressed ROM pack,
and copy its path on the computer.
14. Now Open Miflash.exe and paste into the address bar the
ROM file folder path copied in the last step.
15. Then click Refresh button to refresh MiFlash Tool, and
MiFlash should automatically recognize the Xiaomi Redmi
Note 4G device.
16. To start flash ROM file to your device, you can click Flash
Button.
17. Now, wait until the progress bar inside MiFlash turns fully
green, which means the ROM has been successfully
installed. Then your device should automatically boot to
the new version..
18. Finish
Software:
MIFlash tool
http://bigota.d.miui.com/tools/MiPhone20141107.exe
ROM Fastboot, I Use MIUI5 for fastboot,
http://en.miui.com/thread-98234-1-1.html
Now open Miflash , click on browse button.
Select advanced
4. Select ONLY “FLASH ALL.BAT”, in FASTBOOT SCRIPT
OPTION.
5. Leave the second option BLANK [ Nv boot script – we dont
need to fill it ].
6. Browse and select proper files from image inside fastboot
rom folder
7. Connect the device to pc
8. Drivers will install , let them finish.
9. Press refresh On Mi flash ,
10 JUST PRESS FLASH BUTTON, Ignore any message like
ukknown device ..
11. The phone is now being flashed , after operation
completed , remove the wire ,
connect the battery , assemble phone and boot (if mi logo
come your phone is fixed )
(if battery discharged it will not boot – put it on charge if
red led blinks – it means phone fixed).
resource:
http://en.miui.com/thread-28640-1-1.html
http://en.miui.com/thread-73348-1-1.html
http://en.miui.com/thread-80284-1-1.html
Note 4G LTE thats caused by:
HARD BRICK Redmi Note is like:
- Can't Charging / LED charging Off
- Can't detect to Windows
- Can't enter recovery mode and fastboot mode
NOTE: USE THIS GUIDE ONLY FOR DEAD/
HARDBRICK REDMI NOTE 4G ONLY
I want to give tutorial to repair HARD BRICK / DEAD Redmi
Note 4G LTE thats caused by:
- Flashing ROM NOT For Redmi Note 4G / wrong Device ROM
- File ROM damage / damage file in ROM or damage file from
extract that want to Flash
- Flash not perfect / dead electricity, disconnected on the
middle of fasboot flashing,USB Cable damage / Slot USB
Damage
- Flashing wrong Recovery image or fastboot rom
****USE MI PC SUITE TO
FLASH FASTBOOT ROM ON
BRICKED REDMI NOTE LTE *****
Flash MIUI On Bootloop / Bricked Xiaomi Redmi Note 4G Via
Fastboot Mode And Flashtool.
1. We must using PC or computer with windows operating
system based. As suggesstion use windows 7 or higher.
2. Make sure that your Xiaomi Redmi Note 4G device is fully
charged, Or you can provide minimum 80% of battery life.
3. This guide will help you update your device to the latest
MIUI ROM version.
4. All user data, account, and file stored on this process will
be deleted..
5. For best suggesstion, Please back up your data stored on
phone memory.
6. Download and install MIUI ROM Flashing Tool, Here .
7. Download MIUI ROM version for Xiaomi Redmi Note 4G
8. After download complete, Please check if the ROM file
extension is tgz . If it is .gz , please rename it to tgz
9. Turn off the Xiaomi Redmi Note 4G device.
10. Press the Volume– key and the Power button at the same
time to enter Fastboot mode. And you will see like this
picture.
11. Then connect the device to the Windows PC via a micro
USB cable
12. Double click on the downloaded ROM file to decompress
it.
13. Then Open the file folder for the decompressed ROM pack,
and copy its path on the computer.
14. Now Open Miflash.exe and paste into the address bar the
ROM file folder path copied in the last step.
15. Then click Refresh button to refresh MiFlash Tool, and
MiFlash should automatically recognize the Xiaomi Redmi
Note 4G device.
16. To start flash ROM file to your device, you can click Flash
Button.
17. Now, wait until the progress bar inside MiFlash turns fully
green, which means the ROM has been successfully
installed. Then your device should automatically boot to
the new version..
18. Finish
Software:
MIFlash tool
http://bigota.d.miui.com/tools/MiPhone20141107.exe
ROM Fastboot, I Use MIUI5 for fastboot,
http://en.miui.com/thread-98234-1-1.html
Now open Miflash , click on browse button.
Select advanced
4. Select ONLY “FLASH ALL.BAT”, in FASTBOOT SCRIPT
OPTION.
5. Leave the second option BLANK [ Nv boot script – we dont
need to fill it ].
6. Browse and select proper files from image inside fastboot
rom folder
7. Connect the device to pc
8. Drivers will install , let them finish.
9. Press refresh On Mi flash ,
10 JUST PRESS FLASH BUTTON, Ignore any message like
ukknown device ..
11. The phone is now being flashed , after operation
completed , remove the wire ,
connect the battery , assemble phone and boot (if mi logo
come your phone is fixed )
(if battery discharged it will not boot – put it on charge if
red led blinks – it means phone fixed).
resource:
http://en.miui.com/thread-28640-1-1.html
http://en.miui.com/thread-73348-1-1.html
http://en.miui.com/thread-80284-1-1.html
No comments:
Post a Comment